Foundations of Woodworking
12-week intensive program - Fall 2018
Fall 2018 - Waitlisted
Oct 1- Dec 21
Scholarships may be available for qualifying students
Believe in preserving tradition?
Donate to our scholarship fund
Our Philosophy Behind the Course
Traditionally woodworkers (joiners) learned their craft working as an apprentice in the Master Craftsman's shop, doing the grunt work and learning by assimilation over many years. Our approach is a little different. We're assuming that you're smart; are developing or already have a passion for woodworking; and can devote three months to intensive learning.
This course drills deep into the basics, beginning with a firm foundation in understanding wood as a material and incorporates introductory training in a wide range of techniques. You'll leave with an in-depth experience of hand tools, having practiced applications of joinery methods, considered choices for wood selection and worked with non-toxic materials as well as understanding practical planning for designing and executing woodworking projects.
The curriculum focuses on imparting skills through a series of projects designed to build on one another in techniques and complexity.
We follow many traditional standards because they impart the work ethic of doing things right by emphasizing quality, attention to detail, considering impact and longevity, and working to high standards for lasting work. Our instructors are experienced craftspeople who recognize the value of passing on their skill set to the next generation of woodworkers. We strive to invite you into our community by connecting you with others who have a passion for craftsmanship.
We're committed to passing on the living tradition of woodworking--rooted in techniques that create lasting results and instilling the values and practices of fine craftsmanship, sustainability, and creative expression.
In the Port Townsend School of Woodworking’s twelve-week Woodworking Foundation course, you will learn the essential skills, tools and mindsets of the traditional joiner. This is NOT an industrial arts course with a focus on machinery and production processes. Rather, it is a course in PRE-industrial artisanship--the creation of individual works through mostly hand tools and skills..
For most of the course we'll be heavily focused on developing your skills using hand tools. As a developing woodworker, there is no substitute for putting in the hours of direct hands on practice it takes to gain an intuitive understanding of wood. The early part of this course focuses on working with hand tools as we believe they bring you closer to wood as a material. You can rip a board on a table saw without much thought to the wood itself, but you will understand much more about grain if you rip a board with a hand saw. As the course progresses, machine processes are introduced as a pragmatic aid in expediting projects.
On completion, you will graduate with a set of self-made tools, fixtures and storage units (not to mention the skills required to build them) that will serve and last you the rest of your life. You’ll be amply prepared to continue your woodworking education into specific trades such as architectural woodworking (finish work), custom door and window construction, solid-wood furniture, cabinetry, and boat-building. Over the course, we invite guest lecturers from the community to share their experiences of becoming vocational woodworkers in these trades.
Topics covered in the foundation course include:
The Nature of Wood
Understanding how wood works: effects of working with and across grain; of density and other fundamental characteristics.
How and why wood moves.
Selecting and dealing with figure.
Selecting and conditioning wood for various applications.
Wood as a Design medium
Introduction to designing wooden structures of beauty and integrity--from pre-industrial (geometry-based) to machine-oriented strategies.
Structural considerations of grain orientation
Selection, orientation and sizing of joints
Strategies to accommodate wood movement
Choosing traditional glue and fasteners
Sawing components to width and length with handsaws at a sawbench
Construction and use of a bench hook and shooting board (for precision cutting and trimming at the workbench)
Surfacing and edging work with scrub and foreplanes
Truing faces and edges with try, jack and block planes
Dimensioning with stationary machine tools. (Operation of the table saw, jointer, planer and band saw for material preparation will be covered in this course--though their eventual use is optional on a per-student basis.)
Design and Layout
Introduction to the design, construction and use of the straightedge, try-square, marking gauge and winding sticks. Creation of story sticks, templates, component and cutlists.
Layout of components on stock for both efficiency and aesthetic considerations
Lofting, patterning and geometry
Mortise and tenon joints
Layout and construction of frame and panel structures
Making mortises with mortise chisels
Making and conditioning riven pegs for draw-bored tenon joints
Cutting out tenons with back saws
Design and layout of rabbets, dadoes and grooves
Shaping and fitting faces and shoulders of joints with firmer and paring chisels
Creating dadoes with a saw and chisel (also dado and router plane)
Design and layout of dovetails (through, blind, and multiple)
Installing fasteners and hardware
Smoothing and Finishing
Use of smoothing planes for final surfacing of components.
Use of “card” scrapers
Use of rasps, files and floats
Choosing and applying traditional finishes like shellac and tung oil
Safe practices for handling finishing rags
Safety with hand and power tools
Efficient and effective sharpening and maintenance strategies are taught and practiced for all the hand tools used in this course.
Caring for and restoring hand tools
Minimum of 6 students and a maximum of 10 students
Course duration and hours:
Class hours are 9:00 am to 5:00 pm Monday through Friday with an hour break for lunch. Students are expected to arrive at 8:30 am to practice and prepare for the day.
The workshop is fully available to students during class time Monday through Friday. After the first four weeks of the class, the bench room is available after hours and on weekends.
The school is fully equipped with sets of high quality hand tools for each workbench. You do not need to bring tools to this course.
We recommend not buying tools prior to the class but suggest that you use the school's tools and let that experience guide your purchasing decisions. You are welcome to bring any tools you already own.
This class is open to novice woodworkers and more experienced woodworkers who would like to broaden (or simplify) their approach to woodworking. What do we mean by novice? We think it means you are a person who has decided to commit to learning new skills; to grow a passion for the craft of working with wood; and has a strong sense of the limitations of your own knowledge.
We prefer that you have some experience with woodworking before taking this class. If you have no woodworking experience then we’d like you to produce evidence of strong practical skills, problem solving ability, and experience with hand work (we can do this in a phone call). We're looking for the right attitude. This 12-week class is mentally and physically rigorous.
The projects in this course follow a natural progression of skills, techniques and tools.
Some of the early student-made tools are, in fact, used to help make the next tool or bench fixture in the series. You are supported in the building of these projects with step-by-step outlines, knock-down examples and continuing one-on-one consultations with the faculty. Periodic evaluations of your progress with faculty helps keep you on track.
The description below is an outline for how the course will proceed. We intentionally maintain a level of flexibility in our curriculum to adapt and respond to the needs of each group of students depending on aptitude. Each project has a basic standard of completion as well as design opportunities for elaboration and exploration of more advanced techniques. Our instructors will guide you through projects that are best suited for your ability level.
As time allows, classes may also get the opportunity to practice coopering, tool restoration, turning on a lathe, steam bending, carving, or toolmaking.
Project 1: Three-Legged Stool from a Tree
Working with wood fresh from the log, this green woodworking project is the perfect introduction to edge tools and wood grain. In the first week you will produce a three-legged stool using buck “whip”saws for crosscutting the log to length, wedges and froes for splitting out leg stock, drawknife and spokeshaves at a shaving horse for shaping the legs and using travishers, rounding planes and specialized rasps for shaping the seat.
Project set 2: Layout tools and bench fixtures
These layout tools and fixtures, mostly in hardwood, were traditionally made by the artisan for his own use:
Bench hook/shooting board
Optional additional projects in this set:
You may optionally also build a layout square, panel gauge, wood-bodied hand plane, and a chisel mallet.
Project 3: Joiner’s Tool Tote
In the fourth week of the course, you’ll build a tool tote that features dovetails joining bottom-to-end boards; rabbeted and copper-nail pinned side boards; shaped end panels and curved handles passing through angled mortises. This joiner’s tote also features an optional lift-out box for layout tools with lapped (or optionally dovetailed) corners and a sliding lid. We devote two weeks to this project.
Project 4: chisel chest
This intermediate project builds on the rabbeting and dovetail joinery skills from the tool tote and introduces carcase construction techniques including building and hanging a frame and panel door. This is our first real taste of cabinet making.
Project 5: Frame and Panel Chest
The last third of the course is dedicated to a frame and panel chest.
Working within a set of guidelines, students will go through the process of drafting, designing, selecting wood, processing stock, cutting joinery, as well as exploring finishing and decorative details.
This project has the most flexibility in design opportunities for embellishments. Instructors will help guide students towards project goals that are both challenging and appropriate to their skill levels.
With the Grain: A Craftsman’s Guide to Understanding Wood by Christian Becksvoort. A little knowledge about trees goes a long way toward improving your woodworking. You don’t need a degree in dendrology to build a desk. But you do need intimate knowledge of how our raw material grows and – more importantly – how it responds to its environment after it has been cut and dried.
The New Traditional Woodworker by founding member Jim Tolpin. This is an introduction to hand tools (and the projects in the class) that shares Jim's thinking about the mindset needed to be a hand tool woodworker. You will receive a copy in the first week of class. The cost of the book can be deducted from your materials fees. You'll have time to read the book during the first week in preparation for the second week.
$75.00 Registration Fee (due at the time of registration)
$750.00 1st Deposit (due upon acceptance into the course)
$1,500.00 2nd Deposit (due 2 months before class start date)
$5,250.00 3rd Deposit (due 1 month before class start date)
= $7,575.00 Total Payments
Two Steps are required:
Register - you pay a $75.00 non-refundable registration fee. Registering adds your name to the class roster.
Submit an application - there is no fee to submit an application. The application is your opportunity to tell us why you want to take this course. We review your application as a final determiner of acceptance to the course.
* The Register and Apply buttons are at the bottom of this page.
A materials deposit of $300.00 is included in the total payments of $7,575.00 Any unused materials deposit will be returned at the end of the course. You may use the materials deposit to buy books, finish, wood, fasteners, and hardware. Due to credit card processing fees, we kindly ask that students make the 3rd Deposit of $5,250.00 or largest, final payment of the tuition payments by personal check, money order, or bank check.
This course runs during the off-season in Port Townsend. Vacation rentals and shared housing can be picked up in town. We maintain and offer a list of housing opportunities with home owners who enjoy hosting students and offer a range of accommodations and reasonable rates. Students are responsible for contacting the providers and arranging housing that suits their needs.
Our school fund-raises so that we can offer scholarships for the Foundation Course. Our ability to offer scholarship depends on us having funds available and requiring that students meet the conditions that donors attach to the funds.
The school received VA approval to receive GI Bill funding in January 2017. Read more...
Transfer Credit for Our Graduates:
Goddard College accepts the satisfactory completion of our Woodworking Foundation Course for 12 semester units of transfer credit. See the Goddard College site for further details on programs, degrees granted, and transfer credit details.
The Port Townsend School of Woodworking is licensed as a Washington State Private Vocational School. The school is not nationally accredited and regrettably cannot accept AmeriCorps Funds.
Application and registration
Foundations of Woodworking runs every fall (September - December) and winter (January-March). The application process for each session opens nine months in advance of the course start date. There is no fee for applying. Applications are completed online by students.
If the class is full and you would like to add your name to the waitlist, choose the Register button below to add your name to the waitlist.
What's in the application?
Enrollment agreement stating School Policies and Procedures including:
Physical Eligibility and Safety
Code of Conduct
Statement of Financial Responsibility
Why are you interested in taking Foundations of Woodworking? What drew you to this course? What are you hoping to gain? (250-500 words)
What else should we know about you? Share some fun stuff about yourself. What other experiences do you bring to the class?(up to 100 words)
Scholarship Application (optional)
Please take the time to read our Registration, Cancellation and Refund Policy.
You must Register and Apply. You will receive a Registration Confirmation email and confirmation of your application email after you submit your registration and application. Please contact us if you do not.